Archives

The GMA Techline

October 1st, 2018

Toxicity of nonwovens? Q: Are there any comprehensive tests (or a general synopsis) of the environmental toxicity of leachate from nonwoven polypropylene fabrics when aged in a freshwater or saltwater solution? Regulatory and municipal bodies in Europe and New Zealand are requesting more info about products that are used in riparian and coastal environments. A: […]

Read More

Dr. Robert M. Koerner answers your geosynthetics questions

June 5th, 2018

Get your technical geosynthetics questions answered by one of the world’s leading experts on geosynthetics through the GMA Techline. View past questions and answers at https://tinyurl.com/GMATechline. Email gmatechline@ifai.com anytime for fast, direct answers to any and all technical geosynthetics questions. This one-of-a-kind resource is free to all courtesy of the Geosynthetic Materials Association (GMA), Geosynthetics magazine and the […]

Read More

Your geo technical questions answered on the GMA Techline

March 1st, 2018

Looking for answers to your geosynthetics technical questions? Contact the Geosynthetics Materials Association (GMA) Techline for thorough answers to the most detailed questions. Everything from measuring puncture resistance to the chemical effects of fracking flowback on HDPE geomembranes has been addressed by the GMA Techline. Dr. Robert M. Koerner and Dr. George Koerner of the […]

Read More

GMA Techline

October 1st, 2017

Welding HDPE to PVC and more Q: I would appreciate any input you have on these questions: Can a high-density polyethylene (HDPE) geomembrane (GM) be welded to a PVC geomembrane? I am looking to connect a geomembrane to a building foundation. Based on some research, I have found the following options: bolt the geomembrane to […]

Read More

GMA Techline

August 1st, 2017

Liner repair? Pullout tests? Sewn seams? Shear strength of sludges? Geomembrane liner repair Q: I have a facility that has submitted liner repair documentation for the repair of a high-density polyethylene (HDPE) liner for a leachate/stormwater pond at an industrial landfill site. The repairs were performed using either a patch or, for indentations and small […]

Read More

Your geo questions answered on the GMA Techline

June 7th, 2017

Looking for answers to your geosynthetics technical questions? Contact the Geosynthetics Materials Association (GMA) Techline for thorough answers to the most detailed questions. Dr. Robert M. Koerner, who has more than 40 years of experience teaching, writing about, researching, and consulting on geosynthetics, responds to questions that range from which geosynthetic to use for a […]

Read More

Questions and answers from the GMA Techline

February 1st, 2017

Spraying? Shear Strength? Hydraulics? [A more] non-permeable GT? Q: I have received an inquiry for a non-permeable geotextile, which is UV-resistant and will be installed on a long slope for erosion control. Could you kindly recommend a product that would meet these requirements or a solution for this application? Your assistance with this is much […]

Read More

Questions and answers from the GMA Techline

August 1st, 2016

Geosynthetic filter failure Q: I am interested in your upcoming webinar on geosynthetic filters and was hoping to get a little clarification on the content. I’m most interested in how geotextile fabrics are used with riprap but I also understand these fabrics are perhaps more commonly associated with roadway construction. How much does this webinar […]

Read More

Geocomposite drainage layers

October 1st, 2015

Flammability? Zip ties? MARV? Ponds? GT specs? Questions and answers from the GMA Techline. I wonder about your opinion on the use of a triplanar geocomposite for landfill drainage layer. We have not approved these in our jurisdiction to date. I have a current application where this is proposed to be used (vertical expansion). I […]

Read More

Saturated soil cover on liner question

October 1st, 2015

Questions and answers from the GMA Techline. I need your advice on a reservoir we are designing. It is an irrigation reservoir with a 40-mil HDPE geomembrane liner on a 3:1 slope. The client wants to cover the liner with 1ft of silt loam soil. The water elevation in the reservoir will fluctuate about 15ft […]

Read More