CCR landfill final cover test pad—Part 2

October 1st, 2020

By Nina J. Balsamo, John Massey-Norton, John R. Klamut, Terry Queen,Charles F. Straley and Mark R. Lehner FIGURE 1 Test pass of loaded 45-ton (40.8-tonne) truck over 3 feet (0.9 m) of cover soil on bench An integrated drainage system (IDS) geomembrane, which provides both a low-permeability membrane and drainage space above the geomembrane, is […]

Read More Edit

Benefit/cost analysis as it relates to service life of geosynthetics

August 1st, 2020

On the surface, performing a benefit/cost (B/C) analysis is a straightforward process. However, ensuring that such an analysis is accurate and thorough is a much more nuanced task. In 2008, Bob Koerner laid out the procedure for geomembranes in Geosynthetic Research Institute (GRI) White Paper #12 “GS Selection Based on B/C Ratio.” This article expands […]

Read More Edit

CCR landfill final cover test pad—Part 1

August 1st, 2020

By Nina J. Balsamo, John Massey-Norton, John R. Klamut, Terry Queen,Charles F. Straley and Mark R. Lehner An integrated drainage system (IDS) geomembrane, which provides both a low-permeability membrane and drainage space above the geomembrane, is being used in the final cover at a coal combustion residuals (CCR) landfill in West Virginia. Part 1 of […]

Read More Edit

The GMA Techline

August 1st, 2020

Seaming dissimilar geomembranes Q: I kindly request your technical support in the questions below: A nonpolyethylene geomembrane was used in phase 1 of the tailings dam waterproofing system of a gold mine. For the expansion (phase 2), the use of a high-density polyethylene (HDPE) geomembrane is being evaluated. How can the HDPE geomembrane join the bituminous […]

Read More Edit

The GMA Techline

February 1st, 2020

Moderated by George R. Koerner and Y. “Grace” Hsuan DARCIAN PERMEABILITY Q: I am aware of the section in your book regarding geomembrane “permeability” and get from it that it aims to calculate an equivalent Darcian permeability using vapor diffusion via Fick’s law. Can one use the derived permeability then when calculating flow using Darcy’s […]

Read More Edit

The GMA Techline answers all

August 1st, 2018

UV Weathering of Geotextiles Q: My firm is providing construction quality assurance services for a landfill cell expansion. We are having an issue with our contractor and are going to be in a position of having 8 ounces/square yard (271 g/m2) of nonwoven geotextile exposed for a period of time, which exceeds the seven-day limit […]

Read More Edit

Testing a new method for mining-waste storage using polymer-enhanced geosynthetic clay liners

July 31st, 2018

Geosynthetic clay liners (GCL) and polymer-modified geosynthetic clay liners (PMG) are gaining favor for use in industrial waste disposal and ore-processing applications (Athanassopoulos et al. 2015, Donovan et al. 2016a, Donovan et al. 2016b). The GCL or PMG can be a component of a composite liner system that will allow for increased performance (relative to […]

Read More Edit

GMA Techline

October 1st, 2017

Welding HDPE to PVC and more Q: I would appreciate any input you have on these questions: Can a high-density polyethylene (HDPE) geomembrane (GM) be welded to a PVC geomembrane? I am looking to connect a geomembrane to a building foundation. Based on some research, I have found the following options: bolt the geomembrane to […]

Read More Edit