Proposed ASTM geosynthetics standard will aid in road and pavement design
November 11th, 2021
Photograph courtesy of Tensar Corp. ASTM International’s geosynthetics committee (D35) is developing a proposed standard that will provide engineers with specific information for components necessary for road and pavement design. The proposed standard (WK70888) outlines a commonly used test to characterize the performance of geosynthetics for roadway applications. Specifically, it describes the use of the […]
USUCGER launches Testing Innovation Fellowship Program
October 15th, 2021
Photograph courtesy Tensar Corp. The United States Universities Council on Geotechnical Education and Research (USUCGER) launched a new student Testing Innovation Fellowship Program aimed at transitioning geosynthetics-related research to American Society for Testing and Materials International (ASTM) standards and increasing student engagement in our professional organizations. The fellowship program will be jointly supported by the […]
ASTM International geosynthetics committee developing proposed vinyl sheet piling standard
February 12th, 2021
ASTM International’s geosynthetics committee (D35) is developing a proposed standard that covers vinyl sheet piling used in marine and geotechnical fields for seawalls, retaining walls, flood walls, erosion control and pollution cutoff. According to ASTM member Steve Hargrave, innovation and engineering director at CMI Limited, the proposed standard (WK75165) will fill the need for a […]
ASTM International cancels all in-person standards meetings through February 2021
November 2nd, 2020
In light of COVID-19 and ongoing safety concerns for members and staff, ASTM International announced today that all scheduled in-person January and February 2021 standards development meetings (including independent meetings) have been canceled. In July, ASTM International announced the cancellation of all in-person meetings for the remainder of 2020. These decisions are based on several […]
New standard will support measuring quality of cement in geosynthetic composite mats
June 29th, 2020
A new ASTM International standard will aid engineers and specifiers looking to understand the quality and strength of cement contained in geosynthetic cementitious composite mats (GCCMs). ASTM’s geosynthetics committee developed the new standard, which is needed to allow for a consistent industry method for the application of compression strength in GCCMs. GCCMs are flexible, concrete-impregnated […]
ASTM honors Von Maubeuge and Allen
June 14th, 2019
During the biannual meeting of ASTM International in Denver, Colo., June 5–7, the society awarded the Award of Merit to NAUE’s Kent von Maubeuge and the L. David Suits Award to Sam Allen of TRI Environmental. Kent von Maubeuge The Award of Merit was established in 1949 by the ASTM International Board of Directors and […]
ASTM hosting GCL workshop in Denver
May 21st, 2019
The American Society for Testing and Materials (ASTM) will hold the workshop “Advances in Characterization of Hydraulic Barrier Performance of GCLs” at the Sheraton Denver Downtown Hotel in Colorado on June 5. Chaired by Kent von Maubeuge of NAUE GmbH & Co. KG, the workshop will cover test prescription, long-term hydraulic performance, equipment and laboratory […]
Geosynthetics Conference 2019 roundtable focuses on geocomposite peel testing
March 6th, 2019
On February 12 during the Geosynthetics Conference 2019 in Houston, Texas, a roundtable discussion was held regarding geocomposite peel testing and a potential new approach for testing of this index property. The session was moderated by Richard Thiel and included approximately 65 attendees. The lively discussion focused on the previously unrecognized high variability of the […]
Christopher honored with 2018 Koerner award and lecture series
February 1st, 2019
The Geosynthetic Materials Association (GMA), led by a Koerner awardee selection task force, chose Barry R. Christopher, Ph.D., P.E., as the recipient of the 2018 Robert M. Koerner Award and Lecture Series. The award and lecture series is named for Robert M. Koerner, Ph.D., the founder and director emeritus of the Geosynthetic Institute and professor […]
Barry R. Christopher honored with 2018 Koerner award and lecture series
September 11th, 2018
The Geosynthetic Materials Association (GMA), led by a Koerner awardee selection task force, selected Barry R. Christopher, Ph.D., P.E., as the recipient of the 2018 Dr. Robert M. Koerner Award and Lecture Series. The award and lecture series is named for Dr. Robert M. Koerner, Ph.D., the founder and director emeritus of the Geosynthetic Institute […]