This page was printed from

Stormwater association offers maintenance agreement

News | November 13, 2012 | By:

Inspection checklist templates are now available online

The Stormwater Equipment Manufacturers Association (SEMA) has drafted a new maintenance agreement for use by state and local government agencies to set ordinances requiring the maintenance of all stormwater best management practices (BMPs).

In a Nov. 12 press release, the SEMA said stormwater BMPs are practices—land-based, proprietary, or natural—hat provide a level of treatment or storage to improve the water quality of a watershed. These practices, in one form or another, are installed on every projec—practices that require routine inspection and maintenance, according to the release.

A sample Operation and Maintenance Agreement is contained in this document, which also includes templates for inspection checklists for each type of BMP, including water quality buffers. The press release noted that the inspection checklists can also serve as an inspection report for each facility. The templates are general guidelines that can be modified by the design engineer or plan designer as needed for site-specific conditions.
A copy of this document is available online.

Questions and comments regarding the SEMA or this maintenance agreement should be directed to: Laurie Honnigford, managing director,
+1 651 554 1895 or

Source: Stormwater Equipment Manufacturers Association

Share this Story

Leave a Reply

Your email address will not be published. Required fields are marked *

Comments are moderated and will show up after being approved.