GeoAmericas 2012—Lima, Peru
October 1, 2011
…By Elizabeth Peggs GeoAmericas 2012 will be held May 1-4 in the San Isidro district of Lima, the capital and largest city in Peru. San Isidro is the…
Found 412 results.
October 1, 2011
…By Elizabeth Peggs GeoAmericas 2012 will be held May 1-4 in the San Isidro district of Lima, the capital and largest city in Peru. San Isidro is the…
October 1, 2011
…take a destruct for every 500ft of extrusion and another for every 500ft of fusion) rather than a running combined total, which might make it harder to keep a proper…
October 1, 2011
…cut in 6in.-diameter holes at 15–25ft spacings along the horizontal runout of the FML. Then weld 12in.-square pieces of FML over each hole, but only seam them along the top…
October 1, 2011
…(all layers) was ~46,000 square meters (~11.4 acres). This fairly slow installation pace was the result of several unique installation details: (i) the installation of two drainage (leak-detection) channels running…
October 1, 2011
…cover is a 60-mil, three-ply CSPE geomembrane (two-ply rubber with a 10 × 10 scrim reinforcement) that capitalizes on the long-life performance and protection record of this geomembrane in exposed…
October 1, 2011
…first runner-up for his paper, “Enhancing Ballast Performance Using Geocell Confinement. The winners of the GI-sponsored “Geo Challenge”—aka, see-how-little-reinforcement-can-be-used-to-build-an-MSE-wall-with-beach-sand-and-craft-paper-and-then-load-it-to-failure competition were Rensselaer Poly, followed in second place by Cal Poly–San…
September 23, 2011
…July 2011, the PRB ruled in Tensar’s favor, finding that all material claims of its Chinese TriAx patent were valid. Since its original invention of the first integral-oriented geogrid in…
September 22, 2011
…12-in. berm was constructed at the top of the slope. Catch basins with slope drains helped divert site runoff from eroding the repaired slope. Surface/slope reinforcement materials were then installed…
September 2, 2011
…Agru America Inc., manufacturer of polyethylene geomembrane liners, has added a new, twin-screw, high-production extruder to its production facility in Fernley, Nev., according to an August press release…
August 1, 2011
…stormwater retention systems and the amount of CO2 created from diesel fuel consumed during construction. Stormwater regulations Stormwater runoff is created from rainfall and snowmelts that flow over impervious areas…