Found 386 results.
October 1, 2016
…a low permeability cap installed. The characteristics of this sludge made traditional treatment and handling a non-viable option. Numerous bench scale tests and samples were evaluated by the engineering firm…
October 1, 2016
…looking to install a geosynthetic liner as part of a 16-km (10-mi) elevated wood and metal structure for conveying water—a flume. The project was located near Mount Rainier (Photo 1)…
October 1, 2016
…highlight the work as it happens. In Part 1, the project is described, with the prep, manufacturing, and fabrication stages highlighted. In Part 2, installation, testing, and quality assurance on-site…
September 20, 2016
…aspects of geomembrane fabrication, testing, installation, quality control, and quality assurance. The internship began at CLI’s corporate headquarters in Parker, Colo. While in Parker, Guo observed and worked on factory…
August 1, 2016
…The assembly crew was able to configure and install about 1,500 yards of geofoam blocks a day. How geofoam, as lightweight structural fill, solved a variety of construction challenges…
August 1, 2016
…Eight new ASTs were installed during construction, each with a storage capacity of 125,000 barrels (Photo 2), which primarily store jet and marine diesel fuels. Other major new structures included…
June 24, 2016
…September 25-28, 2016 Ljubljana, Slovenia Managing Wrinkles, Bridging, and Ballasting During Geomembrane Installation ABSTRACT: There have recently been a number of geomembrane liner installation projects involving ponds and dams…
June 1, 2016
…side of pipeline installations. During construction, actions must be taken to protect water quality, stabilize soil, and prevent soil erosion. Pipeline right-of-ways traverse many different types of landscapes, passing through…
June 1, 2016
…be subjected to rainfall during the test, a properly designed drainage system with equally spaced drain outlets should be installed in each test section; otherwise, the compacted subgrade soil may…
April 1, 2016
…The ASTM Committee D35 on Geosynthetics conducted its 2016 winter meeting in San Antonio, Texas, Jan. 27–29, 2016. The first order of business was the installation of new officers…
TEXTILES.ORG
