Tips on choosing a high-quality landfill cover
July 8, 2021
…the fresh face of a working cell is highly uneven and irregular. Every little bit of metal, rock or plastic that pokes up from the smoothed face can catch the…
Found 112 results.
July 8, 2021
…the fresh face of a working cell is highly uneven and irregular. Every little bit of metal, rock or plastic that pokes up from the smoothed face can catch the…
July 6, 2021
…This is where the fun part begins. In many cases, a pilot hole can be drilled with a 12–18-inch (30–46-cm) bit that has a slightly larger diameter than the anchor….
June 1, 2021
…sands project in Alberta, Canada. We know that CETCO installed its CL GCL product there year-round from 2005 to 2008. One needs to use a bit of common sense. Store…
February 10, 2021
…Robert M. Koerner Lecture and Award in 2017. *** The virtual workshop costs $295.00 for ASCE members, and $395.00 for nonmembers. For more information or to register, visit http://bit.ly/ASCE-MSEWorkshop….
January 29, 2021
…profession and enhance member engagement. In addition, the leadership will host an open question-and-answer session to continue the discussion as we all move toward the future. Register at bit.ly/2021JointTownHall….
October 1, 2020
…and multi-interface strength tests shows relatively good agreement, T. Stark and F. Niazi (2015) or Z. Yuan and R. Swan (2008). Single-interface test results appear to be a bit more…
April 1, 2020
…day the flow is less (on average), raising the Sy a little bit less each time, until it reaches infinitely close to the limit of the curve, in this case…
April 1, 2020
…are typically a bit cooler, wet and partly cloudy. Over the course of the year, average temperatures can vary from 35°F to 104°F (2°C to 40°C). FIGURE 3 Hinkle Reservoir…
March 23, 2020
…are putting plans in place and refining them as situations change. For a list of how some banks are offering relief to customers affected by the coronavirus visit https://bit.ly/3afsVcc….
October 1, 2018
…Marilyn Ashley will send it to you. That said, I am a bit uneasy in using empirical shape factors between different puncture test methods, but you might try and see…