Found 379 results.
June 16, 2021
…FC Géosynthétiques, a leader in the installation of geosynthetic products, announced the acquisition of Innovex Produits Techniques Inc., a company specializing in the distribution of geosynthetic materials, and…
June 1, 2021
…FIGURE 1 Installation of reinforcement geosynthetic An operator at a nonhazardous waste storage facility proposed extending the facility’s life, within the existing perimeter, by vertically expanding the cells…
June 1, 2021
…34-mile (55-km) stretch of the track for immediate repair and were designed with geocell reinforcement. All twelve locations had degraded permafrost and needed culvert pipe installation, as there were defined…
June 1, 2021
…Q: I am working on supporting a guide (independent) on what to consider when geosynthetic clay liners (GCLs) are installed in minus temperature regions (e.g., –4˚F [–20˚C]). There…
April 28, 2021
…installed this solution, which has successfully proven its reliability and durability. Comprehensive requirements Heavy stormwaters involve large amounts of rain within a short period of time. The high rain volume makes it difficult for water to infiltrate into the…
April 7, 2021
…lagoon; remediating related infrastructure; and installing a new cover. The HRAL cover allows the anaerobic processing of effluent, manages odors and allows the produced methane gas to be beneficially used,…
April 1, 2021
… In Part 1 of this two-part article, test methodologies and rationales were presented for the evaluation and quantification of SRD performance in both bench-scale and large-scale “as installed” scenarios….
April 1, 2021
…for geosynthetics. The same benefits of using modular construction for buildings can be realized with geosynthetics. For example, installation of a factory-fabricated geomembrane can occur simultaneously with site work, allowing…
April 1, 2021
…Q: We are a large liner installation firm that has been asked to install a geomembrane liner from low gradient to high gradient. Is this the new normal?…
March 30, 2021
…An engineering firm representative was on-site to provide installation assistance and support. The installers prepared the subgrade according to council specifications. A formation width of 25 feet (7.6 meters) was…
TEXTILES.ORG
