TEXTILES.ORG
Due to the demand for higher packaging capacity and improved packaging, TenCate has installed a RoRo StretchPack® solution to replace heat shrink packaging at its production site in Bezons near Paris, France. RoRo StretchPack® by Tentoma is a cold packaging technology using a tubular stretch hood film suitable for horizontal sealed packaging of large rolls.
Tight packaging without heat shrink
The new RoRo StretchPack® packaging line has increased the packaging capacity at the plant in Bezons. Plant manager Christophe Dupont says, “Our packaging capacity has increased, and now we can pack more varieties and sizes of our rolls.” Especially on the very large rolls where TenCate has increased its packaging capacity.
Also, the packaging quality has increased. Using stretch hood film instead of heat shrink film gives a tight and narrow packaging. Previously, the packaging had a long-welded sealing along the roll side, which was prone to break during transport and handling. It is not the case anymore. The tubular stretch hood film leaves no sealing along the roll side, but only a short strong sealing at each roll end.
Reductions in film consumption and energy consumption
The tight packaging removes excessive use of film for packaging, which TenCate previously needed to reduce by heat shrink anyway. Also, stretch film has a higher puncture resistance than shrink film, which enables reducing the film thickness without compromising the packaging quality. It has reduced the film consumption, and just like the energy consumption, it has decreased after removing the heat shrink oven. Overall, RoRo StretchPack® has contributed to improving the sustainability compared to the heat shrink packaging line.
The safety area has also improved. Firstly, removing heat shrink has eliminated the risk of fire at the packaging line. Secondly, there is further safety for the employees as all operations immediately stop when someone enters the safety zone.
A versatile packaging solution
The new packaging line is designed by Tentoma to pack random-size rolls. TenCate produces rolls in widths up to 6200 mm, with a diameter of up to ø800 mm. To cover the product range, four film sizes are used. Each film stand can hold a ø800 mm film roll, which contains up to approximately 2.4 km film with a film thickness of 100 my. The high film capacity limits the number of film roll shifts. TenCate is using the four-film stand for a combination of different film sizes and film with different print and branding. The fact that the roll is not passing through a heat shrink oven anymore ensures uniformity and a nice appearance of the logo printed on the film. Besides the packaging machine, the total RoRo StretchPack® solution consists of an infeed conveyor with a pusher, an outfeed conveyor with an integrated weighing system, swing- and tilt conveyors and a core plug applicator.
Automated core plug inserts
The newly developed core plug applicator from Tentoma automatically adapts to varied sizes of roll diameter. It is working together with the existing core plug applicator, so each plug applicator inserts a core plug in each end of the roll. The magazine in the new applicator has as standard a capacity of 100+ core plugs.
Benefits for TenCate Geosynthetics
• Automated packaging line for multiple roll sizes
• Tight and smooth packaging without any sealing along the roll side
• Improved packaging quality – 100% waterproof
• Film savings – due to the use of stretch hood film
• Energy savings
• Improved safety
• Adaptive core plug applicator
Read more at www.tentoma.com