Found 380 results.
March 30, 2021
…An engineering firm representative was on-site to provide installation assistance and support. The installers prepared the subgrade according to council specifications. A formation width of 25 feet (7.6 meters) was…
March 23, 2021
…The Geosynthetic Institute (GSI) will sponsor a webinar, “Geosynthetic Drainage Materials: Applications, Design, Installation and Performance,”on April 14, from 11:30 a.m. to 1 p.m. EST. Geosynthetic Materials Association…
March 2, 2021
…There are many regulations and requirements associated with landfill liner installations. For example, when planning the installation of a new municipal solid waste landfill (MSWLF), there are three…
February 15, 2021
…Layfield USA Corp. announced the completion of the supply and installation of a chlorosulfonated polyethylene (CSPE) liner and floating cover system as part of a refurbishing and upgrade…
February 9, 2021
…(reflection cracks) quickly become visible again on the road surface and have to be rehabilitated. HaTelit asphalt reinforcements successfully close this gap: Thanks to their quick and easy installation, they…
February 1, 2021
…engineered earth armoring solution extend into the product’s useful life. Once installed, it helps to decrease sedimentation and pollutants, and encourages infiltration of water back into the groundwater table. These…
February 1, 2021
…the Filtration Component of a Sediment Retention Device Using Site-Specific Soil, or in large-scale “as installed” conditions using the standard test method, ASTM D7351, Standard Test Method for Determination of…
February 1, 2021
…to install a natural-appearing shoreline protection structure with a height of 8.2 feet (2.5 m) to protect the entire 1 mile (1.7 km) of the resort shoreline. Next, three 656-foot…
February 1, 2021
…and pelletizing systems, which can sometimes yield a very good product; however, consistency and traceability are issues. INSTALLING CCR LINER LOW TO HIGH? Q: I am an engineer for a…
February 1, 2021
…189 ounces per square yard (4.2 and 6.4 kg/m2), giving an important resistance to lifting in windy regions and possible installation even in windy regions at high altitudes (ASTM D3776)….
TEXTILES.ORG
