Found 412 results.
October 6, 2021
…Photograph courtesy of AGRU America What do Tesla, Apple and Ford have in common? They all rely on mines that produce metals like lithium, which drives our technology-hungry…
October 1, 2021
…in other applications (EPRI 2009) (Figure 1). Land disposal of CCRs is regulated under the “coal ash rule” incorporated into Subtitle D of the Resource Conservation and Recovery Act (RCRA)…
October 1, 2021
…enter the ponds because the constructed berms are several feet higher than the surrounding ground surface, and diversion and control ditches are used to direct the run-on and runoff for…
September 17, 2021
…Ruestersieler Watt in Wilhelmshaven, Germany, in 1963. Over the years, two main systems have established themselves on the market today: large-format geotextile tubes filled hydraulically with sand (SoilTain Tubes) and…
September 13, 2021
…(30 cm) of compacted clay. Therefore, using a GCL can significantly reduce material transportation costs and improve installation times. This article originally appeared on the AGRU America blog, https://agruamerica.com/blog….
September 1, 2021
…Run/Walk Tuesday, Nov. 2 | 6:45 am Location: Meet at Omni Nashville entrance Tickets required. Member $25, nonmember $35. IFAI’s annual Fun Run/Walk is back, with a twist! Participants will…
August 25, 2021
…An AGRU HDPE geomembrane installed in Tulfes, Austria. Photograph courtesy of AGRU Austria Ponds are useful in a variety of functions, serving in processes such as water treatment,…
August 4, 2021
…Masud, graduate research assistants at the University of Wyoming in Laramie are the runners-up of the Student Paper Competition. Their paper, “Improved Estimation of Pile Resistances in Intermediate Geomaterials Using…
August 1, 2021
…Russell et al. (2003). Both models considered the three-dimensional effect of column patterns. In addition to soil arching, design of GRCS embankments must determine the required maximum tension in the…
July 22, 2021
…risk of a rupture. With this traditional manufacturing method, the fill opening interrupts the woven structure of the material, reducing the strength at the location of the fill opening. This leads to an overall reduction in the safety factor and in the maximum…
TEXTILES.ORG
