New ASTM geosynthetics standards for quantification of material properties for pavement components

GeosyntheticsMagazine.com | July 1, 2010

Two new ASTM International standards will aid in the recent national movement to develop a mechanistic-empirical design guide for pavements. Both new standards, developed by ASTM International D35 on Geosynthetics, will cover quantification of fundamental material properties for pavement components.

The standards, ASTM D7499, Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness, and ASTM D7556, Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests, are under the jurisdiction of Subcommittee D35.01 on Mechanical Properties.

“ASTM D7499 and ASTM D7556 will eventually be used to determine interaction properties and tensile properties of geosynthetic materials that will be directly utilized in the design of geosynthetic-reinforced pavements,” said Eli Cuelho, research engineer with the Western Transportation Institute at Montana State University, and a D35 member.

According to Cuelho, when geosynthetic materials are used to reinforce the base course layers of flexible pavements, two required main design parameters include the interaction between the geosynthetic and the surrounding aggregates, and the tensile properties of the geosynthetic. While these properties are typically determined using static or semi-static loading, the most relevant interaction tests use cyclic loads. The new standards will provide tests to quantify soil/geosynthetic interaction properties or tensile properties of the geosynthetic when subjected to cyclic loading.

Cuelho said that the most likely users of ASTM D7499 and ASTM D7556 will be commercial testing laboratories that will run the tests for manufacturers and designers from public transportation agencies or private consulting companies. All interested parties are encouraged to join in the activities of D35.01.

Next meeting of ASTM Committee D35: Feb 2-4, 2011, in Baltimore

Technical contact: Eli Cuelho, Western Transportation Institute, Montana State University, Bozeman, Mont., +1 406 994 7886; elic@coe.montana.edu

ASTM staff contact: Christine Basile, +1 610 832 9728, cbasile@astm.org

For more information: www.astm.org

Comments

Comments are the opinion of individual posters and do not reflect the views of Geosynthetics or Industrial Fabrics Association International.

• 

  JORGE PEREZ

  Yesterday
  9:36 am CDT

  VERY USEFULL TOOL

  Congratulation to all guys in ASTM, this is a great tool to all of us that are improving this type of solution in our countries.

   

  Will help us a lot to provide certain proposal specially to DOT.

  Best regards.